GENERAL QUESTIONS

I need help setting up my new IPTV (MAG250/254) Box
Extras supplied in our IPTV Package (A) HDMI cable (B)Supplied is a LAN/Ethernet cable of suitable length to reach from the Router, the Router must be...
Sun, 1 May, 2016 at 3:44 PM
WiFi Set up for MAG 254 ( and some Firmware updated MAG250)
Sun, 1 May, 2016 at 4:14 PM
Setting up your MAG250 to work with a WiFi connection
If you are Presented with a "Page Loading Error" then follow these Instructions for Setting up the WiFi Adapter ( Dongle) Only if you are Usi...
Mon, 6 Oct, 2014 at 9:55 AM
I have lost some of my TV channels
I have Lost some  of my TV channels ... The TV listing and the EPG is there but no picture or Sound. These IPTV boxes use remote Portal acc...
Sun, 1 May, 2016 at 3:50 PM
I have the TV list but there is no channels
I have the TV list but there is no channels  Press the Menu Button and make sure "All" is highlighted, if it is then check to see if t...
Sun, 1 May, 2016 at 3:52 PM
I have the TV channel list but it is not showing any TV channels
I have the TV channel list but it is not showing any TV channels This is 99% a network connection problem, the box has lost contact with the server...
Sun, 5 Oct, 2014 at 4:52 PM
'Page Loading Error'
The IPTV box will either be installed via your own router or through a WiFi adapter (Dongle)  If you have your own router connected to a telephone line...
Sun, 12 Oct, 2014 at 2:54 PM
Changing SD (Standard Definition) to (HD) High Definition output
Most IPTV boxes, those that use XBMC as a Media Player generally stream in LDTV (Low definition) as it needs lower bandwidth, however when stretched to fit ...
Mon, 6 Oct, 2014 at 11:43 PM
Setting Parental Control
We assume that you are in the normal watching mode ( watching a TV or Movie)  From Remote Control...... PRESS Menu Button        ...
Tue, 7 Oct, 2014 at 9:53 AM
How to Set Up the Weather
To be able to set up the Weather Forecast you will need to read the section on " Time Zone Setting" first to set up your "Localization&quo...
Fri, 10 Oct, 2014 at 8:35 PM